Monorail Lighting Kit

Monorail Lighting Kit

This can easily shape using your hands because there is no special equipment is required. The only thing to remember is not to form a very tight curve when using the monorail as this may damage the fence. There are many producers of the monorail; unfortunately every manufacturer has adopted a different proprietary standards for their monorail. This makes it difficult for the different components from different brands to be exchanged. It is also difficult to configure one of these standards. But the monorail continues to be a source of light that are not only stylish but also economical and practical. It is also very flexible to use and can provide lots of light from the equipment and only use a single resource. Many advantages in the monorail lighting.

In general, glass and metal form is a material commonly used for the monorail equipment. The curtains come in different variations. Almost all equipment is provided with 12 lamp voltage. If the transformer is used has been 24Voltage, it is important to use a 24V lamp. You can also choose to use a low wattage, if the bulb is too light, using low voltage track lighting.

If the amount is less than watt transformer, then you only need this transformer. On the other hand, if the number of lamps must be connected to the monorail more wattage transformer than you, you should use one of the higher wattage. Make sure that running a monorail supported separately by different transformers. One way this can be done is to use non-conductive connector.

When you finish working on the circuit and the transformer, the next task to be done is to drill holes where you need it. Remember that the hole is proportional to the hole used to connect the monorail to the ceiling or wall.

Monorail Lighting Kit